Internal Server Error
The server encountered an internal error and was unable to complete your request. Either the server is overloaded or there is an error in the application.
Nipissing University recognizes its responsibility to protect employees/ students/ volunteers and contractors from exposures to potentially hazardous environments by providing appropriate personal protective equipment (PPE), respirator fit testing and training on the use of respirators.
The Canadian Standards Association (CSA) Standard Z94.4-02 (Selection, Use and Care of Respirators) requires a written respiratory protection program to be in place where protection is used to protect workers from inhaling hazardous atmospheres.
For more information on Respirator Fit Testing refer to the Respirator Fit Testing FAQ page.
If you feel that you require respirator fit testing, please contact your supervisor and/or the Human Resources Generalist - Health, Safety & Wellness to discuss your needs. Once your needs have been evaluated and you have been approved for respirator fit testing you will need to make an appointment with the Laboratory Safety Coordinator (available at extension 4180).
Prior to your respirator fit test be sure to review the following documents:
You will also need to fill out one of the following forms and bring it with you to the respirator fit test:
Note: If the forms won't open in the browser, please right-click and save to your hard drive.